Visit “Cutting Machine.com” if you want to know about the cutting work of the paper, resin, film, rubber, vinyl, glass fiber and so on.


 
 
 
Choice of paper
cutting machine
Inquiries
Inquiries are welcome. Contact us
by phone, by fax,
or by e-mail.
TEL:+81-568-67-5311
FAX:+81-568-68-0495
MAIL:info@itotec.co.jp


Top pageChoice of paper cutting machine > Resin and plastics


Wood
Wood paper for laminated plywood
Wood
The material is cork
Wood
CFN
Paper and
paper craft
Paper
Paper and
paper craft
Packing
Paper and
paper craft
Twisted paper string ornament
Paper and
paper craft
Hard press board
Felt
Wool felt
Felt
Saran rack filter
Felt
Cloth felt
Plastic
Plastic cardboard
Plastic
Polyester film
Plastic
Paulownia
Plastic
CFRP
Urethane
Urethane resin
Urethane
Urethane foam
Rubber
Rubber
Vinyl
Soft vinyl sheet
Glass fiber
Glass fiber mat
Metal
Metal deposition sheet
PS board
PS board mat
           
Honeycomb
Honeycomb
           
  Workpiece (material to be cut):Plastic cardboard, polypropylene
Cutting case, company I

Material to be cut: Plastic cardboard, dan plate, polypropylene, paulownia, metal deposition
Cutting machine: eRC-200DX,JAC-200CFC
【Key points of cutting】
Material and angle of cutting edge High-speed steel 23°
Setting method Same as that of cutting machine. Front workpiece loading
Clamp (pressing method) Gently press
Pressure 4KN
Angle at which the cutting edge is lowered Standard
Method of clamping the cut material Immediate release
Others  



  ワWorkpiece (material to be cut):PET, polyester film
Cutting case, company J

Material to be cut: PET, polyester film 
Cutting machine: JAC-160DX
【Key points of cutting】
Material and angle of cutting edge High-speed steel 23° is ground at two steps to 26-28°
Setting method Same as that of cutting machine. Front workpiece loading
Clamp (pressing method) Use a clamp pedal to achieve the dimension accuracy
Pressure 20KN
Angle at which the cutting edge is lowered Standard
Method of clamping the cut material Immediate release
Others Inverter-controlled low-speed knife motion


  Workpiece (material to be cut):Resin, plastic
Cutting case, company W

Material to be cut: Paulownia
Cutting machine: eRC-200DX、JAC-200CFC
【Key points of cutting】
Material and angle of cutting edge High-speed steel 23° two-step grinding
Setting method Same as that of cutting machine. Front workpiece loading
Clamp (pressing method) Gently press
Pressure 4KN
Angle at which the cutting edge is lowered Standard
Method of clamping the cut material Immediate release
Others  


  Workpiece (material to be cut):CFRP
A new material, CFRP, can be handled.
Feel free to contact us and make inquiries about
your own requirements and requests.

 
   
© ITOTEC CO.,LTD. ALL RIGHTS RESERVED